APC Rack PDU 2G Switched Zero-U 16A 230V Cord

Full Specification

Output

Overload Protection

No
Maximum Total Current Draw

16

Input

Input frequency

50/60 Hz
Acceptable Input Voltage

220 – 240VAC
Number of Power Cords

1
Load Capacity

3700VA
Maximum Input Current

16A
Maximum Line Current

16A
Regulatory Derated Input Current (North America)

16A

Physical

Maximum Height

988MM, 98.8CM
Maximum Width

56MM, 5.6CM
Maximum Depth

46MM, 4.6CM
Net Weight

3.23KG
Shipping weight

5.5KG
Shipping Height

1125MM, 112.5CM
Shipping Width

165MM, 16.5CM
Shipping Depth

114MM, 11.4CM
Color

Black

Environmental

Operating Temperature

-5 – 45 °C
Operating Relative Humidity

5 – 95 %
Operating Elevation

0 – 3048meters
Storage Temperature

-25 – 65 °C
Storage Relative Humidity

5 – 95 %
Storage Elevation

0 – 15240meters

Conformance

Approvals

CUL listed, EN 55022 class A, EN 55024, EN 61000-3-2, EN 61000-3-3, FCC part 15 class A, ICES-003, PSE, UL listed, VCCI class A, VDE
Standard warranty

2 years repair or replace

Sustainable Offer Status

RoHS

Compliant
PEP

Available in Documentation tab
EOLI

Available in Documentation tab
Rack PDU 2G, Switched, ZeroU, 16A, 230V, (7) C13 & (1) C19, IEC309 Cord
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
Includes: Installation guide, Locking input power cord, Rack mounting brackets, Safety guide, Serial configuration cable

Output

Overload Protection

No
Maximum Total Current Draw

16

Input

Input frequency

50/60 Hz
Acceptable Input Voltage

220 - 240VAC
Number of Power Cords

1
Load Capacity

3700VA
Maximum Input Current

16A
Maximum Line Current

16A
Regulatory Derated Input Current (North America)

16A

Physical

Maximum Height

988MM, 98.8CM
Maximum Width

56MM, 5.6CM
Maximum Depth

46MM, 4.6CM
Net Weight

3.23KG
Shipping weight

5.5KG
Shipping Height

1125MM, 112.5CM
Shipping Width

165MM, 16.5CM
Shipping Depth

114MM, 11.4CM
Color

Black

Environmental

Operating Temperature

-5 - 45 °C
Operating Relative Humidity

5 - 95 %
Operating Elevation

0 - 3048meters
Storage Temperature

-25 - 65 °C
Storage Relative Humidity

5 - 95 %
Storage Elevation

0 - 15240meters

Conformance

Approvals

CUL listed, EN 55022 class A, EN 55024, EN 61000-3-2, EN 61000-3-3, FCC part 15 class A, ICES-003, PSE, UL listed, VCCI class A, VDE
Standard warranty

2 years repair or replace

Sustainable Offer Status

RoHS

Compliant
PEP

Available in Documentation tab
EOLI

Available in Documentation tab

Reviews

There are no reviews yet.

Be the first to review “APC Rack PDU 2G Switched Zero-U 16A 230V Cord”

Your email address will not be published. Required fields are marked *

0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Open chat
    1
    Need Healp?
    Vaareheson Limited
    Hello,
    Can i help you?